DEXTRA 20V Brushless Impact Driver with 1/4”Quick Release Chuck, Cordless Hand Drill for Home, Adjustable Speed,with LED Work Light, Easy Tightening of Screws on Wood, Plastic and Metal(Tool Only)
$48.80
Drive bit and sleeve: To install the drive bit, insert it into the sleeve as far as possible. If the drill bit is not inserted deep enough into the sleeve, the sleeve will not return to its original position and the drill bit will not be held in place.
To start the tool, simply pull the switch trigger. The speed of the tool is increased by increasing the pressure on the switch trigger and stopped by releasing the switch trigger.
The ergonomically designed rubber-covered handle provides maximum user comfort and less vibration. Men and women can easily use.
Pull the switch trigger to illuminate the light. When the switch trigger is pulled, the light stays on while the switch trigger is being pulled and goes out 10-15 seconds after the trigger is released.
Drive bit and sleeve: To install the drive bit, insert it into the sleeve as far as possible. If the drill bit is not inserted deep enough into the sleeve, the sleeve will not return to its original position and the drill bit will not be held in place.
To start the tool, simply pull the switch trigger. The speed of the tool is increased by increasing the pressure on the switch trigger and stopped by releasing the switch trigger.
The ergonomically designed rubber-covered handle provides maximum user comfort and less vibration. Men and women can easily use.
Pull the switch trigger to illuminate the light. When the switch trigger is pulled, the light stays on while the switch trigger is being pulled and goes out 10-15 seconds after the trigger is released.
This tool has a reversing switch to change the direction of rotation. Press the reversing switch lever from side A to rotate clockwise; press the reversing switch lever from side B to rotate clockwise. Note: The reversing switch can only be used after the tool has come to a complete stop.
Hooks are handy for temporarily hanging the tool, this can be installed on either side of the tool, to install the hooks, insert them into the grooves on either side of the tool housing and then secure them with screws.
To install the driver bit, insert it into the sleeve as far as it will go.
To remove the driver bit, pull the sleeve in the direction of the arrow and pull the driver bit out.
Method of operation: The proper tightening torque may vary depending on factors such as, the type or size of screw/bolt, the material of the work being tightened, etc.
The Dextra Cordless Hammer Drill and other Dextra power tools are available at U-BOOM Direct Store.
TIPS:
After the first charge, make sure the battery is fully discharged before recharging.
Repeat this charging and discharging cycle 4 to 5 times to ensure battery is well conditioned.
Power tool batteries need 95% power storage, long term storage of lithium batteries should be charged every 3 to 6 months.
Be the first to review “DEXTRA 20V Brushless Impact Driver with 1/4”Quick Release Chuck, Cordless Hand Drill for Home, Adjustable Speed,with LED Work Light, Easy Tightening of Screws on Wood, Plastic and Metal(Tool Only)”
Related products
Reviews
There are no reviews yet.